Intermediatephotosynthesis
The Calvin Cycle: Carbon Fixation in Three Phases
Overview
The Calvin cycle is where inorganic carbon becomes sugar: in the chloroplast stroma, the enzyme RuBisCO fixes CO2 onto a 5-carbon acceptor, and ATP and NADPH from the light reactions drive the construction of three-carbon sugars. This lesson works through the three phases — fixation, reduction, regeneration — with the exact stoichiometry examiners expect: 3 CO2 in, 9 ATP and 6 NADPH spent, 1 G3P out.
Learning objectives
- Name the three phases of the Calvin cycle and the key molecule of each
- Explain carbon fixation: RuBisCO, RuBP, and the formation of 3-PGA
- Trace the reduction phase from 3-PGA to G3P with ATP and NADPH inputs
- Account for RuBP regeneration and the fate of the remaining G3P
- Calculate the energy cost per G3P and per glucose produced
Overview: three phases, one net sugar
The Calvin cycle runs in the stroma as a repeating loop of three phases: (1) carbon fixation — CO2 is attached to ribulose-1,5-bisphosphate (RuBP); (2) reduction — the resulting 3-carbon acids are reduced to glyceraldehyde-3-phosphate (G3P) using ATP and NADPH; (3) regeneration — most G3P is rearranged back into RuBP at further ATP cost. It takes three full turns of the cycle — three CO2 molecules fixed — to produce one net G3P that can leave for sugar synthesis. Two G3P, i.e. six turns, build one glucose.
Per net G3P (3 turns): 3 CO2 + 9 ATP + 6 NADPH → G3P + 9 ADP + 8 Pi + 6 NADP+. Per glucose (6 turns): 6 CO2 + 18 ATP + 12 NADPH. Memorize the 3-turn numbers.
Phase 1: carbon fixation
Each turn begins when RuBisCO (ribulose-1,5-bisphosphate carboxylase/oxygenase) catalyzes the addition of one CO2 to the 5-carbon RuBP, forming an unstable 6-carbon intermediate that immediately splits into two molecules of 3-phosphoglycerate (3-PGA). Over three turns, 3 RuBP + 3 CO2 → 6 molecules of 3-PGA. This is the moment inorganic carbon enters the biosphere — every carbon atom in your body passed through this reaction or one like it. RuBisCO is abundant but slow, turning over only a few CO2 per second, which is why plants make so much of it.
The 'oxygenase' in its name is a warning: RuBisCO can also grab O2 instead of CO2, starting photorespiration — a wasteful detour covered in its own lesson.
Phase 2: reduction to G3P
Each 3-PGA is first phosphorylated by ATP (forming 1,3-bisphosphoglycerate) and then reduced by NADPH to glyceraldehyde-3-phosphate (G3P), releasing NADP+ and Pi. Over three turns: 6 ATP + 6 NADPH convert 6 molecules of 3-PGA into 6 molecules of G3P. This phase is where the light reactions' energy investment pays off — the high-energy electrons of NADPH and the phosphate bonds of ATP are now stored in the chemical bonds of sugar. One of the six G3P molecules exits as net product; the other five continue to phase 3.
The Calvin cycle's net output is G3P, not glucose. Glucose is assembled later, in the cytosol, from two G3P — or the G3P is diverted to starch, cellulose, amino acids, or fatty acids.
Phase 3: regenerating RuBP
The five remaining G3P (15 carbons total) are reshuffled through a series of sugar-phosphate rearrangements — involving 3-, 4-, 5-, 6-, and 7-carbon intermediates — back into three molecules of RuBP (15 carbons). This regeneration costs 3 more ATP (one per RuBP). The cycle is now ready for three more CO2. Without regeneration, the cycle would halt after a single turn for lack of acceptor — which is why the ATP cost of this phase is non-negotiable.
Count carbons: 3 CO2 (3 C) + 3 RuBP (15 C) → 6 3-PGA (18 C) → 6 G3P (18 C) → 1 G3P out (3 C) + 3 RuBP remade (15 C). Every carbon is tracked.
Fates of G3P: sugar, starch, and more
Exported G3P is a metabolic crossroads. In the cytosol, two G3P combine (via fructose phosphates) into glucose-6-phosphate, then sucrose for phloem transport. Inside the chloroplast, G3P builds transient starch stored for the night. G3P also feeds cellulose synthesis for cell walls, amino acid skeletons (with absorbed nitrogen), and fatty acids. The Calvin cycle is thus not just a sugar factory — it is the entry point of carbon into virtually all plant biomass.
Examiners deduct marks for 'the Calvin cycle produces glucose.' It produces G3P; glucose is made downstream. Precision with the product name matters.
Regulation: linking light to carbon
The cycle must not run in the dark, wasting ATP. Light activates it through several mechanisms: the thioredoxin system reduces and switches on key Calvin enzymes (including RuBisCO activase targets) only when electron flow is active; stromal pH rises and Mg2+ increases in the light, both stimulating RuBisCO; and rising ATP/NADPH levels signal that the light reactions are delivering. At night these switches flip off, and starch breakdown takes over as the carbon source.
Key points
- Three phases: fixation (RuBisCO + RuBP + CO2 → 3-PGA), reduction (ATP + NADPH → G3P), regeneration (G3P → RuBP, costs ATP)
- Three turns fix 3 CO2 and yield one net G3P at a cost of 9 ATP + 6 NADPH
- Glucose requires six turns: 6 CO2 + 18 ATP + 12 NADPH
- G3P — not glucose — is the cycle's direct product; glucose is assembled downstream
- Light regulates the cycle via thioredoxin, stromal pH, and Mg2+ so it runs only when energy is available
Common misconceptions
✓ Truth: Its net product is G3P (glyceraldehyde-3-phosphate). Glucose, sucrose, starch, cellulose, and amino acids are all built from G3P in later steps.
✓ Truth: It is light-regulated and depends on ATP/NADPH from the light reactions, so it runs in daylight. At night the cycle shuts down and the plant lives off starch.
✓ Truth: RuBisCO is famously slow (a few turnovers per second) and error-prone (it grabs O2 too). Plants compensate by making it in enormous quantities — up to half of leaf soluble protein.
Practice questions
Q1. In the Calvin cycle, carbon fixation is the step where:
- G3P is converted to glucose
- RuBisCO attaches CO2 to RuBP, forming two molecules of 3-PGA
- ATP phosphorylates 3-PGA
- RuBP is regenerated from G3P
Fixation: RuBisCO carboxylates the 5-carbon RuBP with CO2; the unstable 6-carbon intermediate splits into two 3-carbon 3-PGA molecules. This is the cycle's first phase.
Q2. How many turns of the Calvin cycle, ATP, and NADPH are needed for one net G3P?
- 1 turn, 3 ATP, 2 NADPH
- 3 turns, 9 ATP, 6 NADPH
- 6 turns, 18 ATP, 12 NADPH
- 2 turns, 6 ATP, 4 NADPH
Three CO2 must be fixed (three turns) to net one 3-carbon G3P. Cost: 6 ATP + 6 NADPH in reduction plus 3 ATP in RuBP regeneration = 9 ATP + 6 NADPH.
Q3. The direct, immediate product of the Calvin cycle is:
- Glucose
- Sucrose
- Glyceraldehyde-3-phosphate (G3P)
- Pyruvate
The cycle nets G3P per three turns. Glucose and sucrose are assembled later from G3P in the cytosol; starch is made from it in the chloroplast.
Q4. RuBP regeneration (phase 3) is necessary because:
- It releases the O2 byproduct
- It rebuilds the CO2 acceptor so fixation can continue
- It produces the NADPH used in reduction
- It transports G3P out of the chloroplast
Without regenerating RuBP, the cycle would run out of CO2 acceptor after one turn. Five of every six G3P are recycled into three RuBP at a cost of 3 ATP.
Click a question to reveal the answer and explanation.
Frequently asked questions
Why does the cycle need three turns to make one G3P?
Each turn fixes only one CO2 onto one RuBP, and G3P has three carbons. Five of the six G3P made per three turns must be recycled to regenerate the three RuBP acceptors, leaving exactly one net G3P per three fixed CO2 molecules.
Where exactly does the ATP get used?
Six ATP phosphorylate 3-PGA in the reduction phase and three ATP regenerate RuBP — nine total per three turns. The NADPH is used only in reduction (six per three turns), which is why the cycle's ATP:NADPH demand is 3:2.
What is RuBP, exactly?
Ribulose-1,5-bisphosphate: a 5-carbon sugar with phosphate groups on carbons 1 and 5. It is the CO2 acceptor that RuBisCO uses, and the cycle must constantly regenerate it — the reason phase 3 exists.
How do C4 and CAM plants change this cycle?
They do not change the cycle's chemistry at all — they add CO2-concentrating mechanisms around it. C4 pumps CO2 into bundle-sheath cells and CAM stores it overnight as malic acid, but in both cases RuBisCO still runs the standard Calvin cycle on the delivered CO2.