Intermediatecirculatory

The Cardiac Cycle: One Heartbeat Step by Step

Overview

The cardiac cycle is the repeating sequence of contraction and relaxation that pumps blood — about 100,000 cycles per day. This lesson follows one heartbeat: the electrical signal spreading from the SA node, the atria contracting to top up the ventricles, the AV nodal delay, the ventricles contracting to eject blood, and the relaxation phase when everything refills. It also explains cardiac output and how the ECG traces these events.

Learning objectives

  • Describe the three phases of the cardiac cycle in order
  • Trace the electrical conduction pathway through the heart
  • Explain the purpose of the AV nodal delay
  • Define cardiac output and explain how exercise changes it
  • Relate ECG waves to the cycle's electrical events

Three Phases of One Heartbeat

One cardiac cycle — a single heartbeat — lasts about 0.8 seconds at a resting heart rate of 70–75 beats per minute, and it has three phases. First, atrial systole: the atria contract, pushing the final ~20–30% of their blood into the ventricles (most ventricular filling already happened passively during diastole). Second, ventricular systole: the ventricles contract powerfully, the AV valves slam shut, pressure soars, and blood is ejected into the pulmonary artery and aorta. Third, general diastole: all chambers relax, the semilunar valves close, and blood flows from the veins into the atria and through the open AV valves into the ventricles, refilling them.

The cycle in brief

Atria squeeze (top up ventricles) → ventricles squeeze (eject to lungs/body) → everything relaxes (refill). Then it repeats — about 100,000 times a day.

The Conduction System: SA Node to Purkinje Fibers

The heartbeat is coordinated by the heart's built-in electrical system. The sinoatrial (SA) node in the right atrium — the pacemaker — fires spontaneously about 100 times per minute, and the wave spreads across both atria, causing atrial systole. The signal then reaches the atrioventricular (AV) node, which deliberately delays it about 0.1 seconds. From there it races down the bundle of His in the septum and spreads through the Purkinje fibers across the ventricular walls, triggering ventricular systole from the apex upward — wringing blood up into the great arteries.

Why the AV Delay Matters

The AV nodal delay is the cycle's most important pause. It guarantees that atrial contraction finishes — completing ventricular filling — before the ventricles start contracting. If the ventricles fired simultaneously with the atria, they would squeeze against blood still arriving, wasting the atrial contribution and reducing stroke volume. The delay is also a safety filter: it prevents dangerously rapid atrial rhythms from driving the ventricles at the same rate, which is why complete AV block requires an artificial pacemaker.

A deliberate pause

The 0.1-second AV delay lets the atria finish filling the ventricles. It also protects the ventricles from overly fast atrial rhythms — a built-in safety filter.

Systole Ejects, Diastole Fills

Systole and diastole divide the cycle's labor. During ventricular systole (~0.3 s), pressure peaks (systolic blood pressure ~120 mmHg), the AV valves are closed, and blood is ejected — the stroke volume, about 70 mL per beat. During diastole (~0.5 s at rest), the heart relaxes, pressures fall (diastolic ~80 mmHg), the AV valves open, and the chambers fill. Note the heart spends more time relaxed than contracted — and the coronary arteries fill mainly during diastole, when the relaxed muscle doesn't squeeze them shut. Faster heart rates steal mainly from diastole, which is why very rapid rates reduce filling and output.

Cardiac Output: Meeting Demand

Cardiac output — the volume the heart pumps per minute — equals heart rate × stroke volume: about 70 beats/min × 70 mL ≈ 5 liters/min at rest, meaning the entire blood volume circulates roughly every minute. During vigorous exercise, heart rate can triple and stroke volume nearly double, pushing output past 20 L/min in trained athletes. The autonomic nervous system tunes both variables: sympathetic activation raises rate and contractility; parasympathetic (vagal) activity lowers rate. This adjustable output is how the circulation meets changing demand.

Output on demand

Rest: ~5 L/min. Hard exercise: 20+ L/min. The heart meets demand by adjusting both how fast it beats and how much it ejects per beat.

Reading the Cycle on an ECG

The electrocardiogram (ECG) records the cycle's electrical events from the body surface. The P wave is atrial depolarization (just before atrial systole); the QRS complex is ventricular depolarization (just before ventricular systole) — its large spike reflects the ventricles' large muscle mass; the T wave is ventricular repolarization (during diastole). Atrial repolarization is hidden inside the QRS. Reading an ECG is thus reading the cardiac cycle's electrical script — arrhythmias appear as disruptions of this P-QRS-T pattern, linking the electrical lesson to clinical diagnosis.

Key points

  • One cardiac cycle: atrial systole → ventricular systole → general diastole (~0.8 s at rest)
  • The SA node is the pacemaker; the AV node delays the signal so atria finish filling ventricles
  • The bundle of His and Purkinje fibers spread the signal for coordinated ventricular contraction
  • Systole ejects blood; diastole fills the chambers — the heart rests more than it works
  • Cardiac output = heart rate × stroke volume (~5 L/min at rest)
  • The ECG's P-QRS-T waves map directly onto the cycle's electrical events

Common misconceptions

✗ Myth: The heart's left and right sides contract at different times.

✓ Truth: Both atria contract together, then both ventricles contract together. The two pumps are synchronized — the left and right sides always work in lockstep, which is essential for balanced circulation.

✗ Myth: The heart fills with blood during systole.

✓ Truth: Filling happens during diastole (relaxation), when the AV valves are open. During ventricular systole the AV valves are shut — the ventricles cannot fill while they are ejecting.

✗ Myth: The SA node is controlled only by itself.

✓ Truth: The SA node sets the intrinsic rhythm (~100 bpm), but the autonomic nervous system constantly adjusts it: sympathetic speeds it up, parasympathetic (vagus) slows it to the resting ~70 bpm.

Practice questions

Q1. What is the correct sequence of contraction in one cardiac cycle?
  1. Ventricles contract, then atria contract
  2. Atria contract, then ventricles contract after the AV delay
  3. All four chambers contract simultaneously
  4. Ventricles relax while atria relax
Answer: B.

The SA node fires first (atrial systole), the AV node delays the signal ~0.1 s so the atria finish emptying into the ventricles, then the ventricles contract (ventricular systole). Atria and ventricles never contract usefully at the same time.

Q2. What is the purpose of the delay at the AV node?
  1. To speed up ventricular contraction
  2. To let the atria finish filling the ventricles before they contract
  3. To prevent atrial contraction entirely
  4. To synchronize the two atria
Answer: B.

The ~0.1 second AV nodal delay ensures atrial systole completes — topping up ventricular filling — before ventricular systole begins. Without it, the atria would still be contracting against closed AV valves.

Q3. How is cardiac output calculated?
  1. Heart rate plus stroke volume
  2. Heart rate divided by stroke volume
  3. Heart rate multiplied by stroke volume
  4. Stroke volume minus heart rate
Answer: C.

Cardiac output (L/min) = heart rate (beats/min) × stroke volume (L/beat). At rest: ~70 bpm × ~70 mL ≈ 5 L/min — the entire blood volume circulated each minute.

Click a question to reveal the answer and explanation.

Frequently asked questions

What is the difference between systole and diastole?

Systole is the contraction phase (the heart squeezes and ejects blood); diastole is the relaxation phase (chambers fill with blood). Atrial systole fills the ventricles; ventricular systole ejects blood to the lungs and body. One full cycle at rest takes about 0.8 seconds.

What is the path of the electrical signal through the heart?

The SA node fires → atria contract → signal pauses at the AV node (~0.1 s) → travels down the bundle of His → Purkinje fibers spread it through the ventricles → ventricles contract from apex upward. The AV delay lets the atria finish filling the ventricles first.

What is the difference between heart rate and cardiac output?

Heart rate is beats per minute (about 70 at rest); cardiac output is the volume pumped per minute (heart rate × stroke volume, about 5 L/min at rest). Exercise raises both — heart rate up to ~200 bpm and stroke volume higher — pushing output above 20 L/min.

What do the P wave, QRS complex, and T wave represent?

The P wave is atrial depolarization (atria contract); the QRS complex is ventricular depolarization (ventricles contract — the large spike); the T wave is ventricular repolarization (ventricles recover). The ECG reads the heart's electrical activity, not its mechanical squeezing.